RELATEED usb data recovery question
Do need help recover lost file on the usb drive
close usb
Transcend Data recovery software free download,Transcend har
  • Author:urecovery
  • Publish Time:2018-09-17 08:39

Transcend SSD FAQ
1. The system copies Windows 10 to the new hard disk. There is no error message during the copying process. Why can't the computer enter the operating system smoothly after the SSD is installed?
Microsoft technical staff confirmed that if the Windows 10 is upgraded, the authentication message will be bound to the hardware of the computer, such as the motherboard and hard disk.
When the old hard disk is moved to the new hard disk, it will cause abnormal information to be read at boot time, and then a blue screen indicates that the operating system cannot be enabled.
If you install Windows 10 directly and pass the certification, it is not within the above restrictions.
This is a limitation of the Microsoft operating system, and no matter how the system is copied, it cannot be effectively avoided.
2. After changing the SATA setting in the BIOS from IDE to AHCI, the SSD will not boot into Window 7.
This issue is mainly related to the drive driver in Window 7. Before changing the SATA settings, you must enable the driver to avoid problems.
3. If the operating system I use does not support TRIM, how can I avoid the SSD performance degradation?
The SSD contains a garbage collection mechanism, which has the same function as TRIM, and can optimize the processing of data and instructions to keep your SSD at its best. Therefore, even if your operating system does not support TRIM, you can use TranscendSSD with confidence.
4. What is the difference between SLC and MLC?
The SLC (Single-Level Cell) stores one bit of metadata in each memory unit, so that the SLC has lower power consumption and better endurance. Disadvantages of SLC include higher manufacturing costs and lower density.
MLC (Multi-Level Cell) stores two-dimensional data in each memory unit, so that it stores double the amount of data in the same capacity NAND flash device. At the same time, MLC offers lower manufacturing costs. However, the MLC stores one bit more than each element in the SLC, making the MLC have higher power consumption and lower endurance.
5. I purchased a new SSD to replace the original storage device. How can I keep the information of my original operating system and ensure that it can be used on SSD?
It is recommended that you use the system copy method to transfer the operating system from the original storage device to your newly purchased SSD, which saves time for reinstallation and ensures that the original settings are retained. The SSD Scope tool software provided by Transcend website can help you understand SSD information, and also has system copy function, which allows you to quickly and easily copy the operating system and improve the convenience of use.
6. What is the SATA 3.0 specification?
Serial ATA International (SATA-International Organization) introduced the SATA 3.0 specification in 2009 with a transmission speed of up to 6 Gbps per second. Compared to the existing SATA 2.0, the biggest advancement of SATA 3.0 is the increase in access speed, reaching 6Gbps per second. In addition, SATA 3.0 includes several new technologies, including NCQ instructions to improve transmission technology and reduce the power consumption required for transmission.
7. Why does the backup via Transcend Elite fail, and there is no problem using the copy sticker?
In order to distinguish different backup tasks, the backup destination folder automatically creates a folder with the backup task name and the time point at which the backup is added at the second layer, and establishes a corresponding folder according to the path of the current data. As shown below:
The method of copying and pasting is less red-framed. Therefore, files with a file name length of the upper limit can be backed up by copying and pasting.
The actual full file name length contains the disk number, colon, backslash, name, and terminating null characters. A long file name or a file placed at a lower level will not be copied because it exceeds the length supported by the file system, so the backup task will fail.
8. Why did I add the file to the source folder, but Transcend Elite did not sync the file to the destination folder?
If you have never used Transcend Elite to sync the selected folder, when you first back up the source folder to the destination folder, and add the file to the source folder during the synchronization process, the newly added file will not be synchronized. past. After the initial synchronization is completed, the files newly added to the source folder will be synchronized.
9. My USB3.0 device speed is not as good as expected. Can I improve the UASP transmission protocol?
Turning on the UASP transport protocol can indeed increase the speed of the USB 3.0 device to a certain extent, but the following three elements must be met:
1. Computer: Please confirm whether the computer hardware chipset supports UASP.
2. USB3.0 device: Please confirm whether the USB3.0 device chip and firmware support UASP.
3. Driver: The computer platform must be installed with the driver corresponding to UASP.
Windows OS:
- Please install the UASP driver for the corresponding chipset.
- Windows 8 has a built-in UASP driver.
Mac OS X:
- UASP functionality is supported after Mac OS 10.8.
- You can confirm whether your Mac supports UASP function through "About this Mac".
1. Click on "About this Mac"
2. Click on "System Report"
3. Find the "Extension Function" in the "Software" category. If you find "IOUSBAttachedSCSI", it means that the Mac supports UASP.
Transcend SSD FAQ
10. Under Windows, how to format a disk as NTFS?
Taking Windows XP as an example, the following steps are to add the NTFS formatted disk option:
1. Please click to enter "My Computer", select the drive represented by the action disk and press the right button.
2. Select "Content".
3. Select hardware.
4. Click on "Content".
5. Select "Principles".
6. Select "Performance Optimization." When you have completed the above steps, you should be able to format the NTFS disk format option in the formatting tool.
On Windows 7/8/8.1 operating system
1. Choose my computer.
2. Select the right button on the drive represented by the action disk.
3. Select Format.
4. Select "NTFS" in the file system menu and click "Start".
11. After installing the Windows7/Vista operating system using SSD, the system displays a blue screen or the error message "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE".
The SATA driver for Windows 7/Vista must be installed and enabled before changing the BIOS boot disk mode to SATA (AHCI).
12. Why can't I transfer a large file if the file I transferred does not reach the capacity limit but the message "The disk in the destination drive is full..."
(1) Please confirm your file system format first.
(2) Please confirm whether the size of the file you transfer meets the limit of the format. For example, if your file system format is FAT32, the size of a single transfer file cannot exceed 4GB; if your file system format is FAT16, the size of a single transfer file cannot exceed 2GB.
The common disk formats are roughly divided into three types: NTFS, FAT32, and FAT16. Different disk formats have limitations on the size of a single file.
13. If the operating system I use does not support TRIM, how can I avoid the SSD performance degradation?
The SSD contains a garbage collection mechanism, which has the same function as TRIM, and can optimize the processing of data and instructions to keep your SSD at its best. Therefore, even if your operating system does not support TRIM, you can use TranscendSSD with confidence.
14. Why can't I see the folders in a particular drive when I use the Transcend Elite for backup?
About not being able to see folders in a specific drive:
Since Transcend Elite does not support the function of "compressing the disk drive to save disk space", please refer to the following steps to confirm that you have not checked "Compressed disk drive to save disk space".
1. Click on "My Computer"
2. Click the right mouse button on the drive
3. Uncheck "Compress the drive to save disk space" and press "OK".
Transcend SSD FAQ
About not being able to see the network drive
Since Transcend Elite does not currently support web drives, we will respond to your suggestions to relevant R&D and include references for future releases of new versions or related software.
15. What is the difference between a built-in SSD and a general machine-mounted hard drive? What are the advantages?
The biggest difference between SSD and general machine hard disk is storage medium. SSD uses flash particles, which is different from ordinary traditional hard disk, no mechanical parts such as turntable, reading needle, spring, gear, bearing, etc.; Dropping causes the original to be loose, offset, and unreadable. Other advantages of SSDs over general machine hard drives are: faster transfer speeds, lower power consumption, durability, and zero noise.