ADATA sd card recovery software,recover data from ADATA sd c
- Publish Time：2018-09-26 09:59
ADATA sd card recovery software is also a sd memory card data recovery software that can recover our common accidental deletion files, lost files, formatted files, corrupted device files, recoverable data types with pictures, Music, video, documents and PDF files, main recovery device types are, SD memory card, TF phone card, mini SD card, CF card, XD picture card, MMC, memory stick, U disk, digital camera, mobile hard disk, Music player and other storage devices.
As with other recovery software, these devices are scanned first and then previewed.
The more advanced function is that you can restore the files in the deleted partition, restore the error-formatted files, and other files in the recycle bin that are emptied can be restored.
Supported memory card brands are not limited, such as the common Kingston, SanDisk, ADATA or Taipower U disk are no problem.
ADATA was established in May 2001 with the founder of Mr. Chen Libai, who is the chairman and chief executive officer. At the beginning of the establishment of Weigang, Chairman Chen was the ideal of “the leading brand manufacturer of global memory application products”. In the early stage of the business, the memory module was the main product line, and then the application of flash memory was promoted. Development of reservoir application products.
Weigang knows professionally and innovatively to create a competitive advantage in products. Therefore, Weigang's products are from the industrial design, raw material procurement, production process and quality inspection, all through the most rigorous implementation and inspection of Weigang professionals; Constantly innovating, striving to develop differentiated quality products, and won the "Best Award National Product Image Award", "Japan G-MARK Product Design Award", "CES Product Innovation Award" and "German iF and reddot Product Design Award", etc. The glory of many international product awards.
DDR3 1066 Unbuffered-DIMM
ADATA DDR3 1066 Unbuffered-DIMM meets JEDEC standard specifications and is equipped with 128Mx8 original FBGA package granules. It offers 1GB, 2GB and other capacity options, making it the best choice for PC with high stability.
The operating voltage of DDR3 is designed at 1.5V, which is lower than the operating voltage of DDR2 1.8V. The supply consumption is expected to save 30%. For the increasingly significant environmental requirements of globalization, Weigang also fully supports low-power consumption DDR3 products. The improvement of DDR3 frequency is the performance of performance, and the signal quality requirements are relatively strict. In the engineering product verification stage, Weigang Technology has set up a complete testing and evaluation method to make the product stability different from the peers.
DDR2 800 240pin Unbuffered-DIMM Non-ECC Memory:
The Vitesta DDR2-800 is available in a 64x8 particle configuration with a capacity starting at 512MB and a 1GB version, and will continue to be imported into higher capacity products in the future. Since it complies with the JEDEC standard, Vitesta DDR2 800 operates from 1.8V and is a 240Pin foot design. However, WISCO Lab developers have found that the existing DDR2-800 memory granules have great potential, which can further stimulate memory efficiency and push the overall performance of the system to a higher level. At the same operating frequency, compared to the 2.5V DDR, DDR2 can effectively reduce power consumption by about 50% with the help of 1.8V low voltage. At the same time, in order to achieve the effect of frequency multiplication, DDR2 has the advantage of 4-bit Prefetch architecture, and even if the core runs at low speed, it can exert high-speed power on the external data bus (Data Bus), thus reaching the level of DDR2 800.
DDR2 667 240pin Unbuffered-DIMM Non-ECC Memory:
The specifications of the Vitesta DDR2 667 memory module are fully compliant with the JEDEC (Joint Electron Device Engineering Council) international standard. When the frequency is 667MHz, the transmission bandwidth can reach 5.3GB/s, which is more than DDR2 533. A 25% bandwidth growth rate naturally contributes a lot to the overall performance of the system. Under the premise of the same operating frequency, compared with the 2.5V DDR, DDR2 can effectively reduce power consumption by about 50% thanks to the 1.8V low voltage technology. In other words, DDR2 also has a "green" product with the concept of "environmental orientation." On the other hand, with the advancement of particle processing technology, the particle physique has been re-evolved relatively, so the DATA researchers found that DDR2 667 memory has the strength of CL=3.
DDR2 533 240pin Unbuffered-DIMM Non-ECC Memory:
ADATA Vitesta DDRII 533, standard specification is 240 pins, 1.8 volts working voltage and 512M capacity, and according to JEDEC (JOINT ELECTRON DEVICE ENGINEERING COUNCIL; American Electronic Engineering Design Development Union
The standard specification of the Association, using the most advanced 0.10 micron process, FBGA packaged DDRII particles, successfully reduces the spherical contact point between IC particles and the board, and effectively reduces the high frequency operating temperature and data noise; and greatly increases the data transmission rate. And through the built-in ODT (on-die-termination) internal interrupt resistor design, the motherboard does not need to add a row of resistors next to the memory to reduce the space of the PCB; OCD (Off Chip Driver) signal correction technology, let the voltage Rising and falling with minimal DQ-DQS SKEW (clock signal deviation), improving signal quality; and the improved CAS (Column Address Strobe) function, enabling DDRII 533 to successfully break the DDR I speed limit, creating a second per second The data access and output are twice as high as DDR I, and the true data transfer bandwidth of 3.2G per second is achieved.
DDR 600 184Pin Unbuffered DIMM Non-ECC Memory (EOL):
The Vitesta DDR600 is equipped with a selection of original granules, and the module is covered with a red aluminum heat sink. It adds a sense of quality and also helps to dissipate heat, making stability and performance equal. In addition, its high frequency performance of 600MHz, in addition to providing a memory transmission bandwidth of up to 4.8GB / Sec, coupled with the support of the dual-channel architecture of the motherboard, will further reach the peak of 9.6GB / Sec bandwidth, become an upgrade Another key to the overall performance of the system.
DDR 566 184Pin Unbuffered DIMM Non-ECC Memory (EOL):
Extreme speed DDR566 is a high-speed frequency of 566MHz per second under overclocking conditions. The product contains operating instructions to help users correctly set various parameters to maximize the performance of the product and ensure high speed of 566MHz per second through overclocking. frequency.
DDR 400 184Pin Unbuffered DIMM Non-ECC Memory:
ADATA DDR400 desktop memory, standard specification is 184 pins, 2.5 volts working voltage, using DDR particles in TSOP and BGA packages, to produce 256M, 512M and 1G three capacity options with the highest frequency up to 400MHz / sec.
DDR 333 184Pin Unbuffered DIMM Non-ECC Memory :
ADATA DDR333 desktop computer memory, standard specification is 184 pins, 2.5 volts operating voltage, DDR particles in TSOP and BGA packages.
Volume: 24 × 32 × 2.1 mm Operating voltage: 2.7 volts – 3.6 volts Weight: 2 grams
Dimensions: 32 x 24 x 2.1 mm (with cap) Operating voltage: 2.7v – 3.6v
Volume: 20 × 21.5 × 1.4 mm Operating voltage: 2.7 volts – 3.6 volts Weight: 1 gram Speedy CF
Volume: 42.8 × 36.4 × 3.3 mm Weight: 11.4 g (positive and negative value is 0.5)
Super MMCplus 100X
Volume: 24 × 32 × 1.4 mm Operating voltage: 2.7 volts - 3.6 volts SLC (Single Level Cell) Flas
Volume: 15mm × 11mm × 1mm Operating voltage: 2.7 volts – 3.6 volts Weight: 1 gram