admingeotechdata info
Geotechdata.info Free database of geotechnical
Geotechdata.info is an independent website with the mission of providing the scientific and practicing community of geotechnical engineers with a comprehensive, highquality and freely accessible resource of geotechnical information. All about insitu and laboratory geotechnical testing methods.
Parameters Geotechdata.info
2 天前Parameters. Typical values of geotechnical parameters are given for different soils according to USCS. The values listed below represent edited avarge values based on literature and data from geotechical projects. While these values can be used as general estimation in geotechnical problems, they might need to be adapted to the specific
Geotechdata.info Home, Facebook
Geotechdata.info. 514 likes 1 talking about this. Geotechdata.info is an independent website with the mission of providing the scientific and practicing community of geotechnical engineers with a...
Soil bearing capacity Geotechdata.info
2 天前Allowable bearing capacity: The maximum pressure that can be applied to the soil from the foundation so that the two requirements are satisfied: Acceptable safety factor against shear failure below the foundation; Acceptable total and differential settelement; Ultimate bearing capacity: The minimum pressure that would cause the shear failure of the supporting soil immediately below and
Void ratio Geotechdata.info
27 Void ratio is usually used in parallel with soil porosity (n) , which is defined as the
Soil porosity Geotechdata.info
27 Geotechdata.info Updated 18.11.2013 Soil porosity (n) is the ratio of the volume
Vertical Inclinometer Geotechdata.info
Vertical inclinometer is the primary monitoring instrument used to measure the horizontal subsurface deformation in a borehole. It can be used to monitor the lateral deformation of soil and rock in the different geotechnical applications such as deep excavations, diaphragm and retaining walls, high open excavation and stability of embankments.